Telescopic structure
A telescopic arm and linear guides form the mechanical basis for injection-molding take-out.
Injection molding robots
Three-axis servo robots
Purpose-built servo robots for removing molded parts and bringing repeatable handling to your injection molding cell.
Request a QuoteProduct overview
Purpose-built servo robots for removing molded parts and bringing repeatable handling to your injection molding cell.
- Machine range
- 50–420 T
- Payload
- 4–8 kg
- Vertical stroke
- 800–1,200 mm
Application fit
- Injection molding
- Molded-part take-out
- Downstream part handling
Core components
Three-axis servo drive
Compare the model-specific vertical, extraction and horizontal travel against the machine and mold opening.
Sprue handling options
Discuss whether a sub-arm is required for a three-plate mold and how the part enters the downstream process.
Frame material and construction
- The traversing frame carries the telescopic arm on precision linear guides.
- Confirm the mounting dimensions and clearance above the mold for the selected machine.
Model series
- S3-B800IS
- S3-B800WS
- S3-B1000WS
- S3-B1200WS
- Compare the S3 models by machine tonnage, vertical stroke and total payload.
Technical specifications
Swipe to compare specifications
| Model | Injection machine (T) | Horizontal travel (mm) | Extraction stroke (mm) | Vertical stroke (mm) | Payload (kg) | Minimum take-out (s) | Empty cycle (s) | Select model |
|---|---|---|---|---|---|---|---|---|
| S3-B800IS | 50–250 | 1,320 | 760 | 800 | 4 | 0.8 | 5 | Request a Quote ↗ |
| S3-B800WS | 50–250 | 1,320 | 760 | 800 | 4 | 0.8 | 5 | Request a Quote ↗ |
| S3-B1000WS | 150–320 | 1,500 | 940 | 1,000 | 6 | 1.2 | 5.5 | Request a Quote ↗ |
| S3-B1200WS | 300–420 | 1,680 | 1,120 | 1,200 | 8 | 1.2 | 6 | Request a Quote ↗ |
Power supply: AC 220 V ±10 V, 50/60 Hz. Maximum working air pressure: 0.8 MPa.
Selection and customization
Before requesting a configuration
- Provide the injection molding machine model, mold opening and part weight including the gripper.
- For a three-plate mold, specify whether the sprue needs a separate pickup and drop-off point.
THE PORTFOLIO
